Pve Nas Disk Standby Hdparm Only Standby Short Time. Synology DiskStation DS923+ is now available NAS Master Additionally, I tried smartctl -i -n standby /dev/sda even when disks are not mounted only one goes to standby
Hard drive hdparm speed test LinuxConfig from linuxconfig.org
So I set the standby time manually with: hdparm -S 120 /dev/sda So I'd like to set them to standby after some idle time
Hard drive hdparm speed test LinuxConfig
Yes, zfs also shows atime disabled with "zfs get atime tank" For servers, using either method may impact performance, so it's typical for both to be disabled (which is my current goal here) root@Sheevaplug:~# hdparm -S242 /dev/sda /dev/sda: setting standby to 242 (1 hours) root@Sheevaplug:~# hdparm -S /dev/sda -S: bad/missing standby-interval value (0..255) The command is accepted without any error, but then querying for its value returns bad/missing value and the drive keeps spinning down after only few seconds of inactivity.
Linux HDD sleep how to enable and disable with hdparm command tool. even when disks are not mounted only one goes to standby Adjust HDD standby time with hdparm Check the hdparm examples below to see how you can adjust the standby mode of the HDDs on your system
Linux HDD sleep how to enable and disable with hdparm command tool. There are two commands provided by hdparm related to APM First is configuring the APM level using the -B flag.